Automated Email Notifications
Besides the emails you set up with form workflows, EZ Ops sends a number of emails on its own when certain things happen — a form's corrective actions are all done, a task is completed, a reading is out of range, stock runs low. You do not configure these on a form, and workflow settings such as validations and Approval Required do not affect them.
Some can be switched on or off per user or per task; others always send. This article lists each one: what triggers it, who receives it, and what controls it.
Who Counts as a Supervisor for These EmailsSeveral of these emails go to the supervisors for a submitted form. That means users ticked as Supervisor in the form's department:
- The form has a location - Supervisors in the form's department who are assigned to that location, through a plant, field, or run.
- The form has no location - Every supervisor in the form's department.
- The form has no department - Nobody. These emails are not sent to anyone.
There is no per-location Form Supervisor setting — supervisor status comes only from departments. To mark someone as a supervisor, open Org Configuration > Users & Roles > Departments, open the department, and tick Supervisor next to their name. Set each form's department with Select default department on its Form Info tab.
Form Review Emails (HSE Dashboard)These relate to Health & Safety, Custom, and Causal Analysis forms going through the HSE Dashboard.
All corrective actions completed
- Subject - "All corrective actions completed on EZ Ops form: [form name], Form ID: [ID]"
- When - Every corrective action on a form is finished — nothing is still pending or outstanding. It tells supervisors they can now complete their review.
- Who - The form's supervisors
- Can it be turned off? - No
Form sent back to supervisor review
- Subject - Starts "EZ Ops Form Type:" and ends "Status has changed back to investigation."
- When - A form in HSE Review is sent back with Kick back to Supervisor Review Phase, or a corrective task is added to a form that is in HSE Review.
- Who - The form's supervisors, with the kick-back message
- Can it be turned off? - No
HS&E review required
- Subject - "HS&E review required for EZ Ops form. Form ID: [ID]"
- When - A form moves into the HSE Review phase, including when it is reopened with Put back to HSE Review Phase.
- Who - Every user with the HSE Admin setting turned on
- Can it be turned off? - No
Department changed on a form
- Subject - "A form has changed which department it is assigned to. Form ID: [ID]"
- When - Someone edits a submitted Health & Safety form and changes its department. Custom forms do not send it.
- Who - The supervisors of the new department, and every user with HSE Admin turned on
- Can it be turned off? - No
New corrective action
- Subject - "New Corrective Action on EZ Ops"
- When - A corrective action task is created — by a workflow, by a supervisor with Create Task in the HSE Dashboard, or automatically from a failed answer on a form that uses the review process.
- Who - The people assigned to the task, and the person whose action created it
- Can it be turned off? - No
New task, logbook entry, or EZ Message
- Subject - "New Notification on EZ Ops"
- When - You are assigned a task or logbook entry to acknowledge, or someone sends you an EZ Message.
- Who - The person assigned or messaged
- Can it be turned off? - Yes, per user. It only sends to users with Immediate Acknowledgement Emails turned on in their user settings.
Task completed
- Subject - "Task Completed on EZ Ops", or "... Marked as Cannot Complete in EZ Ops". Uses your organization's name for tasks if it has been renamed.
- When - A task is completed or marked as cannot complete.
- Who - Everyone assigned to the task, the members of the task's departments (only those assigned to the task's location if the department has Location Limit on), and the person who created it. The person who completed it is not emailed.
- Can it be turned off? - Yes, per task. It only sends when Notify on Completion is ticked on the task.
Equipment reading out of range
- Subject - "Equipment Log Warning From EZ Ops"
- When - A reading on a reading sheet is above its maximum or below its minimum.
- Who - The person who entered it, and users assigned to that location who have Out Of Spec Emails ticked for it
- Can it be turned off? - Yes, per user and location. Tick or untick Out Of Spec Emails on the user's Assigned Locations panel.
Low stock
- Subject - An "EZ Ops Low Quantity Notice" email naming the item
- When - A consumable misc item or inventory item's quantity drops below its Alert Quantity.
- Who - Users assigned to the item's location who have Receive low quantity notifications turned on. If the item has no location, every user in the organization with that setting.
- Can it be turned off? - Yes, per user, with Receive low quantity notifications in their user settings.
Users can receive regular summary emails. Set them up on the user's page under User Email Notifications > Create New Email Notification:
- Select Type: - Equipment And Site Schedule Email (upcoming and overdue schedules) or Unacknowledged Logs and Tasks Email (tasks and logs you have not acknowledged)
- Frequency: - Every so many days, weeks, or months
- Send Emails on: - A day of the week
- For schedule emails - Include Monthly, Include Samples, Minor Schedule Warning Period, and Major Schedule Warning Period
Summaries are checked and sent each morning. Existing ones are listed under Existing Notifications.
- Schedule summary subject - "EZ Ops Schedule Notices for : [name]"
- Unacknowledged summary subject - "Unacknowledged Tasks and/or Logs on EZ Ops"
MOC and RIK forms have their own approval steps and email the right people at each step. The subject is "A MOC Form Log requires your attention." or "A RIK Form Log requires your attention.", followed by the form ID.
- Form submitted - A RIK goes to all its reviewers; an MOC goes to the MOC Coordinators
- Coordinator approves an MOC - Notifiers and Approvers are emailed, or Change Approvers if the form needs neither
- Notifiers and Approvers all approve - Change Approvers are emailed
- Change Approver approves - Change Confirmers are emailed
- Any reviewer rejects - The person who created the form is emailed
- Reviewers are added - The new reviewers are emailed
- A comment is added - The creator, Approvers, Notifiers, and MOC Coordinators are emailed ("A comment on MOC Form Log requires your attention.")
These cannot be turned off; they follow the MOC and RIK approval process.
Other EmailsMissed inspection frequency update
- Subject - "Missed Frequency Update: Inspection Already Completed or Delinquent"
- When - Someone applies a frequency change to an inspection that another user has already completed, or that has gone delinquent.
- Who - The person making the change
Welcome email
- Subject - "Welcome To EZ Ops"
- When - A new user account is created.
- Who - The new user
| Who receives it | Can it be turned off? | |
|---|---|---|
| All corrective actions completed | Form's supervisors | No |
| Sent back to supervisor review | Form's supervisors | No |
| HS&E review required | HSE Admin users | No |
| Department changed | New department's supervisors + HSE Admin users | No |
| New corrective action | Assigned people + creator | No |
| New task, logbook entry, EZ Message | Person assigned or messaged | Per user — Immediate Acknowledgement Emails |
| Task completed | Assigned, department members, creator | Per task — Notify on Completion |
| Equipment reading out of range | Logger + users with Out Of Spec Emails at the location | Per user and location — Out Of Spec Emails |
| Low stock | Users with Receive low quantity notifications | Per user |
| Scheduled summaries | The user who set them up | Per user — delete the notification |
| MOC and RIK | Reviewers at each step | No |
| Missed inspection frequency update | The person making the change | No |
| Welcome | New user | No |
"Nobody receives the supervisor emails"
- The form has no department. Set Select default department on the form's Form Info tab, and make sure at least one department member is ticked Supervisor.
"Supervisors receive emails about forms from other sites"
- When a form has no location, the supervisor emails go to every supervisor in the form's department. Require a location on forms that use the HSE Dashboard.
"Our HSE team doesn't get the HS&E review emails"
- These go to users with HSE Admin turned on. Turn it on for each HSE reviewer.
"A user gets too many task emails"
- Turn off Immediate Acknowledgement Emails in their user settings for new-task emails, or untick Notify on Completion on tasks where completion emails are not needed.
"Nobody hears about low stock"
- Each person who should be told needs Receive low quantity notifications turned on and must be assigned to the item's location.
- Give every reviewed form a department and a location - The department decides who the supervisors are, and the location keeps emails to the right site.
- Use scheduled summaries instead of individual emails - For busy users, an Unacknowledged Logs and Tasks Email once a week can replace a stream of individual notifications.
- Tick Out Of Spec Emails only where someone will act - It is set per location, so give it to the person responsible for each site.