Catadynes
What Are Catadynes?
Catadynes are flameless catalytic heaters used at oil and gas sites to protect equipment from freezing and to support combustion processes. EZ Ops tracks catadyne units at each site, records their operational status, and flags units that need repair.
Availability: Admins enable Catadynes in Organization Settings (Location Widgets) and on the plant Widgets tab (Display Catadynes, and optionally Display Catadyne Creation Form). If you do not see Catadynes or New Catadyne, contact your admin and sync.
Works offline: Catadyne creation and logging can be done while offline and will sync when you reconnect.
Viewing Catadynes at a Location
Catadynes are listed on the plant or field location page. Each catadyne shows its:
- Physical location on site (where it is positioned)
- Size
- Current status (Lit, Off, or Needs Repair)
- Most recent log
Creating a Catadyne
- Navigate to the plant or field location
- Find the Catadynes section and click New Catadyne
- Fill in the details:
Required
| Field | Notes |
|---|---|
| Location on Site | A description of where the catadyne is physically located (e.g., "North Tank Battery", "Inlet Separator") |
| Size | Select from the available sizes: 6x6, 6x12, 12x12, 12x24, 12x48, 24x18, 24x24, 24x36, 24x48, 24x72 |
| Status | The current operational status — Lit, Off, or Needs Repair |
Optional
| Field | Notes |
|---|---|
| Alias | A short name or identifier for this unit |
| Fuel Type | Type of fuel the unit uses |
| Manufacturer | Manufacturer name |
| Model | Model name or number |
| Serial Number | Serial number for this unit |
If Status is "Needs Repair" when logging
Repair checkboxes appear on the status log dialog (not on the create form). Under Parts Needed, check all that apply:
- Clean Orifice
- Thermostat
- Thermo Couple Aluminum
- Thermo Couple Copper
- Fuel Valve Old Style
- Fuel Valve New Style
- Hand Tubed In
- Regulator
- New Catadyne Needed
Note on offline creation: When you create a catadyne while offline, EZ Ops automatically creates the first log entry from the details you just submitted. The status and notes you entered become the catadyne's first recorded log — you do not need to log it separately after creation.
Logging Catadyne Status
Regularly log each catadyne's status when you visit site so the history stays current and repairs are tracked.
- Open the catadyne from the location's catadyne list
- Click the status button that reflects current conditions:
- Running — stores status as Lit
- Off — the catadyne is not running
- Needs Repair — the catadyne requires attention
- A dialog appears — enter any notes about the current condition
- If the status is Needs Repair, check the Parts Needed items that apply
- Save the log
Each log records who submitted it and when. The previous log is automatically closed when a new one is saved.
Creating a Task from a Catadyne Log
When a catadyne needs repair, you can create a maintenance task directly from the log entry. The task is linked to the catadyne so it appears in the catadyne's history and in the task list.
- Log the catadyne status as Needs Repair
- In the log dialog, click Create Task (or use the task creation option on the log)
- Fill in the task details — description, assigned user or department, due date
- Save
The task will appear in the task list tagged as auto-generated from a catadyne and linked back to this unit. Once the task is completed, the repair is documented.
Common Questions
"I don't see the catadyne creation form at my location"
- The form must be enabled by your admin in the plant settings. Contact your admin to enable it.