Configuring Field Locations
Field Locations (also called Wells or Sites) are the individual site-level records in EZ Ops where operators perform daily work. Each field location belongs to a Plant and can represent a well, battery, compressor station, header, or other facility type. Once created, field locations are where equipment, tanks, schedules, inspections, tasks, and logbook entries all live.
Key point: The location hierarchy — Company → Region/Area → Field → Plant → Field Location — is typically established by the EZOPS team during initial setup, but admins can add and edit field locations and adjust the hierarchy once the organization is configured.
Why Field Locations MatterField locations are essential because:
- Everything attaches to a location - Equipment, tanks, schedules, inspections, and tasks all require a location to exist first
- User access is location-based - Users are assigned to specific locations, controlling what they can see and do offline
- Operational tracking - Well states, visit frequencies, and site-specific data are all managed at the field location level
- Reporting accuracy - Correct location details (GPS, LSD, fluid type) feed into production, emissions, and compliance reports
Before creating a field location, the following must already exist in EZ Ops:
- Company - Typically created by the EZOPS team during initial setup
- Field - The geographic grouping the location belongs to (can be created/edited by admins in Organization Configuration)
- Plant - The plant this location belongs to
Note: If you need a new Company, Field, Region, Area, or CGU created, contact EZ Ops Support at 888-378-4602 ext. 1 or EzopsSupport@Detechtion.com. These hierarchy elements can be managed by experienced admins in the Organization Configuration section but are typically owned by the EZOPS team on new deployments.
Location TypesWhen creating a field location, the most important type flag is Is Well:
- Is Well - Mark this when the location is an actual wellbore with a UWI (Unique Well Identifier). Wells with this flag require a UWI to be entered and may behave differently in production reporting and well state tracking
- Other location types (battery, compressor station, header, pig sender/receiver, etc.) — these flags can be set as needed for your site structure but do not require a UWI
If you are unsure which flags apply to a new location, contact EZ Ops Support at 888-378-4602 ext. 1 or EzopsSupport@Detechtion.com.
Well StatesField locations that are wells track an operational state:
- Active - The well is operating normally
- Shut-in - The well is temporarily not producing
- Suspended - The well is inactive for an extended period
- Abandoned - The well has been permanently decommissioned
- Location - A site/location that is not yet a producing well
Well state changes require a reason to be entered and are logged in the well state history.
How to Create a Field Location- Navigate to Field Locations - Go to the admin menu and select Field Locations (Wells), or navigate to the Plant you want to add the location to
- Click "Add Field Location" - Opens the creation form
- Enter required details:
- Name - The site name as it will appear throughout the app
- LSD - Legal Subdivision identifier for the location
- Plant - The plant this location belongs to
- Field - The field grouping
- Set the location type - Check Is Well if this is an actual wellbore. Enter the UWI when Is Well is checked — this is required
- Save - The field location is created and immediately available for further configuration
[Image placeholder: Screenshot of field location creation form — add if helpful]
How to Edit a Field LocationAfter creation, additional details can be configured:
- Navigate to the field location - Find the location in the Field Locations list or navigate through the plant
- Open the edit form - Click the edit button on the location
- Update the additional details:
- GPS coordinates - Latitude and longitude for the asset map
- Fluid type - The type of fluid produced or handled at this location
- Tubing and casing specs - Inside diameter and other wellbore specs (for wells)
- Visitation frequency - How often operators should visit this site
- Ownership percentage - If the location is partially owned
- License dates - Licence start and expiry dates
- Save - Changes take effect immediately
Once a field location exists, configure it further in this order:
- Assign users - Link the users who work at this location
- Add equipment - Set up reading sheet equipment
- Add tanks - Configure tanks at this location
- Add inspections - Create inspection schedules for the location, tanks, or equipment
- Add misc items - Create inventory items that live at this location
- Add schedules - Set up location-level recurring schedules
For bulk creation, field locations can be imported via an Excel template:
- Download the import template - Available from the Field Locations admin page
- Fill in the template - Each row is one location; follow the column headers exactly
- Upload the file - Use the Import option on the Field Locations page
- Review results - Successful imports are listed; any rows with errors are flagged with the reason
Note: Always download the current template before importing — do not reuse old templates as the column structure may have changed.
Deactivating and Restoring Field LocationsTo deactivate (soft-delete) a field location:
- Open the location and select Delete
- Deactivated locations are hidden from operators but all historical data is preserved
To restore a deactivated location:
- In the Field Locations admin list, filter to show deleted locations
- Find the location and select Restore
- The location and all its data become active again
Important: Deleting a location does not delete its associated records (tasks, logbook entries, schedules) — it only hides the location from the active list.
Best Practices- Enter GPS coordinates at creation - The asset map is much more useful when all locations have coordinates; add them while the location is fresh
- Use consistent naming conventions - Location names appear throughout the app in reports, tasks, and logbook entries — follow your organization's naming standard
- Set visitation frequency - This drives planning and reporting on how often sites are being visited relative to expectations
- Check Is Well carefully - Once set, this flag affects how the location appears in production reporting; confirm before saving
- Use the import template for bulk additions - Adding many locations one at a time is error-prone; the import tool is faster and creates a reviewable record
- Location type flags (is_well etc.) can be changed after creation if a site's classification needs to be updated
- Well state history is permanent — every state change is logged with who changed it and why
- A location must have at least one user assigned before operators can see it in the app
- The asset map uses GPS coordinates to show location pins — always enter coordinates for field locations
Remember: Field locations are the foundation that everything else in EZ Ops attaches to — get the name, type, and plant assignment right at creation, assign users promptly, then build out equipment, tanks, and schedules from there.