Skip to content
English
  • There are no suggestions because the search field is empty.

Custom Forms

 What is a Custom Form?

Custom Forms are configurable data collection forms used for ad-hoc general operational purposes — field checklists, operational reports, site audits, permit documentation, and any other structured data your organization needs to collect that is not specifically an HSE event or an inspection. They follow the same underlying form system as HSE Forms but are used for non-safety, operational data collection.

Key point: Custom Forms are flexible by design — your organization configures the questions, workflows, and notifications to match exactly what needs to be documented. If you are not sure which form to use for a task, check with your supervisor.

How Custom Forms Differ from HSE Forms

Both Custom Forms and HSE Forms use the same form engine and support the same features (questions, sections, workflows, departments, calculations). The difference is in their purpose and routing:

Custom Forms HSE Forms
Purpose General operational data collection Health, safety, and environment events
Typical use cases Field checklists, operational reports, site audits, permits Incidents, near misses, hazard observations, safety audits
Dashboard Custom Forms report HSE Dashboard
Causal forms Not applicable Can be attached by supervisors for root cause analysis

When to Use a Custom Form

Use a Custom Form when:

  • Completing a required field checklist - Pre-job checks, equipment verifications, site walk-arounds that are not inspection-type forms
  • Documenting operational events - Anything your organization tracks systematically that isn't a safety incident or inspection
  • Recording field measurements or data - Specialized data collection that doesn't fit into reading sheets or logbook entries
  • Permit documentation - If your organization uses forms for work permits or operational approvals
  • Any other structured data collection - If your administrator has configured a custom form for a specific workflow, follow their guidance on when to use it

How to Submit a Custom Form

  1. Navigate to the location - Go to the plant or field location where the form applies
  2. Open the Custom Forms section - Find Custom Forms (or Health, Safety & Custom) in the EZ-Nav
  3. Select the correct form - Choose the form type configured for what you need to document
  4. Fill out the form - Answer all required questions. Custom forms can include:
    • Text and number fields
    • Date and date-time fields
    • Radio buttons, dropdowns, and checkboxes
    • Contact fields, department fields
    • File attachments and photos
    • Calculated fields that fill in automatically based on other answers
  5. Complete all sections - If the form uses sections, complete each section in order. Only questions in the active section are editable until that section is submitted
  6. Submit - Once all required questions and sections are complete, submit the form. Workflows fire after all sections are completed

Form Sections

Some Custom Forms are divided into sections to represent a hand-off between users or stages of a process. For example, one section may be for the initial field entry and another for a supervisor sign-off:

  • Only the active section's questions are editable at each stage
  • Each section can only be completed once per sync
  • Workflows do not fire until all sections are completed
  • If you only see part of a form, the remaining sections may be for a different stage or another user

Workflows

Workflows are automated actions that fire when a Custom Form is submitted (or when all sections are completed):

  • Email notifications - Configured recipients are notified that the form was submitted, which questions were answered, and what the results were
  • Corrective action tasks - Tasks can be automatically created based on specific answers (e.g., if a checklist item fails, a task is created to address it)

Workflow validations: A workflow only fires if the form answers match its configured conditions. If an answer doesn't trigger the validation, that workflow does not fire.

Workflows with approval: Some workflows require manual approval before they fire. If your form submission should generate tasks or notifications but nothing has happened, check with your supervisor — the workflow may be waiting for approval.

Departments and Notifications

Custom Forms can be associated with a department, which controls who gets notified via workflows:

  • If a department is set on the form, the department's supervisors are the default email recipients for workflow notifications
  • If Location Limiting is enabled for a department, only the supervisors connected to the location where the form was filled out are notified — not all supervisors organization-wide
  • If the form uses a location not tracked in the app, all supervisors in the department may be notified

Your administrator configures department assignments — operators don't need to manage this.

Calculated Fields

Custom forms can include fields that fill in automatically when enough information has been entered:

  • Calculations are configured by administrators and can perform addition, subtraction, multiplication, or division on other field values
  • More complex calculations can reference when previous inspections or schedules were last completed
  • Calculated fields update automatically as you fill in the form — you do not need to enter these values manually

Common Issues

"I can't find the form I need"

  • Sync your device to get the latest form configurations
  • Contact your administrator — the form may not be configured for your location or may not be visible to your user role

"The form submitted but no tasks were created"

  • If the workflow requires approval, tasks won't be created until a supervisor approves it
  • If tasks should fire automatically, confirm that your form answers met the workflow's validation conditions (certain answers may need to be selected to trigger the workflow)

"I can only fill in part of the form"

  • The form uses sections — only the current active section is editable. Complete the visible section and submit; remaining sections become available in sequence

"I need to correct something I already submitted"

  • Forms cannot be edited after submission
  • Contact your supervisor to determine the appropriate correction path (a follow-up form or a comment may be the right approach)

"A calculated field shows an unexpected value"

  • The calculated value is based on the inputs you've entered — double check that other field values are correct
  • If the calculation still seems wrong, contact your administrator to review the calculation configuration

Tips & Recommendations

  • Use the right form type for the job - Custom Forms are for operational data. Safety events belong in HSE Forms, and scheduled condition checks belong in Inspections.
  • Fill the form in while you are still at the activity - Detail and accuracy drop quickly once you have moved on.
  • Do not type over a calculated field - Calculated fields populate themselves and may appear locked; entering your own value works against the form.
  • Finish every section before expecting a notification - Workflows only fire once all sections of a multi-section form are complete, so a partial submission triggers nothing at all.
  • Photos are available offline, other attachments are not - Any file type other than a photo needs a connection to download.