Location Page
A Location page is the workspace for one site — a well, pad well, compressor, pig sender/receiver, plant, battery, or similar field location. After you open a site from Locations, the Operator Dashboard, Today's Items, or a deep link, this is where you complete work for that site.
Key point: The Operator Dashboard shows due work across sites. The Location page is where you enter readings, receive/send pigs, complete inspections, and save site-specific data. For a full list of modules and what each is for, see the Modules Overview knowledge base article.
Field locations and Plants use the same pattern: sticky section navigator + collapsible panels. Plants can also show Production; some well-only widgets (Plunger, Note, SCADA, Meters) do not appear on plants.
- Sync so your assigned sites are on the device (Locations stays disabled until setup/sync finishes).
- Open a site from Locations, Operator Dashboard / Today's Items links, Day Planner, or deep links from tasks, schedules, or pigs (sometimes scrolled straight to a section).
- Confirm the header shows the site name. Wells may also show Status and (outside USA) LSD.
If you see Location info not found, the site is not in local data — sync again or confirm assignment.
How the page is organizedSticky section navigator
Buttons jump to sections on the same long page (scroll, not separate browser pages). The active button follows as you scroll.
A section appears when org settings, your role, the plant widget, and usually data for this site all allow it. Greyed-out buttons usually mean plant widget off or no asset here — not a broken page.
Typical navigator labels (wells; exact set varies): Location Summary, Logbook, Tasks, Schedules, Inspections, Reading Sheets, Tanks, Senders, Receivers, Plunger, Catadynes, Tickets, Note, Daily SCADA, Hourly SCADA, Site Info., Meters, PSVs & Vessels, Inventory / Misc Items, HSE Forms, Custom Forms, MOC/RIK, Jobs, Field Tickets.
Header identity
| What you may see | Meaning |
|---|---|
| Site name | Alias / plant name |
| Status: … | Well status (blank displays as Active) |
| LSD: … | Legal land description (non-USA) |
| Current Reading Sheet: … | Shown while in Reading Sheets for a machine |
Always available once the page loads. Lists items overdue, due today, or due before the next planned visit.
- Expand groups; tap items that support jump-to.
- Manage appears on manageable alerts. Alerts require a device sync to update.
- With Day Planner, an Items from your accepted route block may appear, with a link back to your list.
Visitation frequency is configured on field locations under Org Configuration (admin).
Working in a section (how location modules behave)Most sections share the same pattern:
- Jump with the sticky navigator and expand the panel if needed.
- Use the section’s tabs/filters — many schedule and inspection lists default to Upcoming (or similar “needs action” views), not All.
- Use primary buttons on that section (New Log, New Task, Start Log / reading sheet actions, Receive Pig, New form buttons, and so on).
- Open a row or View / Edit to work the item; sync when finished so server-side completion sticks.
Examples of location-specific work
| Section | What you typically do here |
|---|---|
| Logbook | New Log; filter/search; acknowledge or view entries for this site (or pad-wide until filtered) |
| Tasks | New Task; incomplete vs completed; open a task to update status and details |
| Schedules / Inspections | Start from Upcoming; open the item and complete it at this site |
| Reading Sheets | Pick equipment; start/continue logs and enter readings |
| Tanks | Enter levels/pumps (dashboard Download List is separate — that export lives on the Operator Dashboard) |
| Senders / Receivers | Send or Receive Pig; dashboard Pending links often land on Receivers |
| Forms (HSE, Custom, MOC/RIK, Jobs, Field Tickets) | Create or continue forms tied to this location |
| Site Info. | Read metadata; edit well status only if offline status changes are allowed |
| Note | Edit and save the site note (queued until sync) |
Deep step-by-step for each module lives in that module’s own article.
Plants vs field locations| Field location page | Plant page | |
|---|---|---|
| Opened from | Field Locations / Near Me / route wells | Plants view (or plant on Today's Planned List) |
| Extra / different | Plunger, Note, Daily/Hourly SCADA, Meters (when enabled) | Production when production interface + permissions allow |
| Same idea | Sticky navigator + org / role / plant gating | Same |
The Locations list routes wells and plants for you.
PadsIf the site belongs to a pad, a banner notes that. Many sections include a pad location filter so logbook, tasks, and other lists can scope to one well instead of pad-wide data.
Switching wells with that filter changes the open site in place. Confirm the header name after you switch. Set the pad filter before logging so entries attach to the correct well.
Common actions- Jump with the sticky navigator, then use that section’s Upcoming / incomplete defaults before switching to All or Completed.
- Create or complete work with the section’s primary buttons.
- Save site Note locally; sync to upload.
- Edit well status from Site Info. only when offline status changes are allowed.
- Follow sender ↔︎ receiver links for pigging.
- After offline work, SYNC. Forms may show complete on device only after sync and server validation.
- Greyed-out navigator buttons: plant widget off or no data at this site — check with an admin before assuming a permissions bug.
- Prefer Locations when you need full history and all modules; use Dashboard / Today's Items when you only need a due item and a jump-in.
- Empty page after login: assignment or sync issue, not a broken Location page.