Skip to content
English
  • There are no suggestions because the search field is empty.

Operator Dashboard

 What is the Operator Dashboard?

The Operator Dashboard is the offline-capable overview of work across the locations assigned to you. After sync, it aggregates logbooks, tasks, schedules, inspections, tanks, pigs, forms, and other widgets so you can see what needs attention without opening each site one by one.

Key point: Use the Operator Dashboard for “what needs attention across my sites.” Use a Location page when you are working at one site. Module purpose and where each feature lives across EZ Ops is summarized in the Modules Overview knowledge base article.

If your Dashboard nav button opens analytics instead, you are on the Report Dashboard — use the Operator Dashboard link on that page (or change your Default Dashboard) to get back here.

How to open it
  1. Complete SYNC so assigned locations and actions are on the device.
  2. Click Dashboard when your Default Dashboard is Operator Dashboard (tooltip: “Summary of all assigned locations”).
  3. Or open Operator Dashboard from the Operator Dashboard › link on the Report Dashboard.

Nav widgets stay disabled until setup/sync finishes. Empty after login usually means missing location assignment or sync.

How the page is organized

Sticky navigation widgets

Buttons across the top jump to sections on the same long page. Exact labels and order in the product:

Production → Logbook (unacknowledged count badge) → Tasks (or your org rename) → Schedules → Inspections → PSVs, Vessels, Meters → Tanks → Pending → Pig Schedules → HSE Forms → Custom Forms → MOC/RIK → Jobs → Field Tickets → User Notes → Contacts → Support

Widgets appear when org settings, your role, and often data allow them. Empty data can leave a widget greyed out.

Filter Field

Filter Field at the top limits most dashboard lists to one field. Clear with X. Stored on the device and shared with the Locations list.

Report Dashboard link

When the org has Report Dashboard enabled, a Report Dashboard link can appear at the top so you can open analytics without changing Default Dashboard.


Using each dashboard section

Production (Production Graphs)

  • Jump with Production. Panel title: Production Graphs (expanded by default when shown).
  • Pick a plant button; graphs default toward daily display. Historical range buttons include 1 / 3 / 6 Month Historical Data (1 month is the usual starting selection).
  • Some orgs also get Daily / Moving Average / shift modes and View All Meter Values.
  • Charts only — no row open. Widget greys out if graphs cannot load.

Logbooks

  • Nav: Logbook. Panel: Logbooks (expanded by default).
  • New Log opens the new log modal.
  • Filters: multi-select including Active Safety Concerns, Unacknowledged, Category; plus Search. Respects Filter Field.
  • Tap a row (or open icon) to view the entry in a modal. Location link opens that site.
  • Badge on the nav button shows unacknowledged count.

Tasks

  • Panel/nav: Tasks (or renamed). Expanded by default.
  • Defaults to Incomplete Tasks (not Completed). … assigned to me defaults on on the dashboard. …/Messages I need to acknowledge defaults off (mutually exclusive with assigned-to-me).
  • Actions: New Task; EZTasks AI when online and enabled.
  • Filters: acknowledge toggle; assigned-to-me (if you have all-tasks permission); Filter by assigned to; dashboard Filter by field; Search.
  • Row opens the task modal. Location link goes to the site.

Schedules

  • Defaults to the Upcoming tab on each schedule type (Preventative Maintenance, Equipment Sample, Calibration, Safety / Well Samples / Reminders, Emission, PSV Schedules).
  • Other tabs: Planned, Deferred, All (with counts). Each type has its own Search.
  • Expand a row for detail, photos, and child schedules. Location link opens the site to complete work.
  • This is a due list across locations — complete schedules on the Location page.

Inspections

  • Defaults to Upcoming per asset type (Tanks, Wells, Pipelines, Liquid Meters, GFM, Plants, Vessels, Misc/Inventory).
  • Other tabs: Past Failed, All. Search per type.
  • Expand a row for frequency/warning detail. Completing an inspection is done on the Location page (the row reminds you to go there). Location link opens the site.

PSVs, Vessels, Meters

  • Combined section. Well-state filter defaults to On Active Wells (also Shut-in / Suspended / Abandoned / All).
  • Each asset group (PSVs, Vessels, Liquid Meters, Gas Flow Measurements) defaults to Upcoming (also All + Search).
  • Location link opens the site for calibrations / detail. Dashboard rows are summary, not full edit forms.

Tanks

Cross-location tank list (not the place to enter a reading — open the location for that).

Control Purpose
Entity multi-select In/Out of Service, Field, Liquid Type, Consumption vs Production
Filter by alarm High / low level, weather pump alarms, overdue reading
Volume display m³ (common default), Litres, US Gallons, BBL (BBL often default on USA)
Search Free-text
Columns Location, Volume + % pill, Name, Liquid Type, Days Until Empty/Full

Download List exports the currently filtered rows to tanks_<date-time>.csv (Location name, Volume, Volume Units, Percent full, Tank name, Liquid type, Days till full or empty). Not the same as online Consumption Export under Reports.

Pending (Pending Pigs)

  • Nav label: Pending. Panel: Pending Pigs.
  • Default view: Pipelines With Pending Pigs (not All Pipelines).
  • Rows are grouped by receiver location: Pending Pigs, Max Pigs, Field.
  • Expand for pipeline/line detail. Location link opens the site scrolled to Receivers so you can Receive Pig.
  • Optional Field / Plant filters when the top Filter Field is empty; plus search.

Pig Schedules (Pig/Batch Schedules)

  • Nav: Pig Schedules. Panel: Pig/Batch Schedules.
  • Defaults to Upcoming kanban (Urgent, missed, Today, Tomorrow, days away, Upcoming). Switch to List View when needed.
  • Cards / Send From links go to the sender location (Senders section) to send.
  • Field / Plant filters when top Filter Field is empty.

Forms (HSE, Custom, MOC/RIK, Jobs, Field Tickets)

Each has its own nav button. Panels are expanded by default when shown.

Nav Panel title (typical) Default / actions
HSE Forms Health & Safety New Health & Safety Form; search; View/Edit; Location link
Custom Forms Custom Forms New Custom Form; form-type filter + search
MOC/RIK MOC and RIK Submit New Online MOC or RIK (online path when available)
Jobs Job Forms New Job Form; select job + search
Field Tickets Field Tickets New Field Ticket; select job + search

Form tables sort toward newest logged first. Deep form how-to is in each forms article.

User Notes

Personal rich-text notes for you (not a site note). Save Note stores locally then syncs. Expanded by default.

Contacts

Internal Contacts and Emergency Contacts (expanded by default). Search internal contacts by name. Add/Edit Emergency Contacts is online-only.

Support (FAQ and Support)

Panel: FAQ and Support. It is always available (no org module toggle) and currently contains:

  • Five built-in FAQs covering missing locations, a missing Catadyne form, when to sync, sharing recorded data, and sync problems
  • Clear Cache
  • Support phone and email
  • Current app version

Important: Before using Clear Cache, confirm there is no unsynced work at risk. If sync is failing and the device may contain unsynced entries, contact support first. Clear Cache is a troubleshooting step—not the first action for every sync or page-load issue.

Some FAQ wording in the current app is old (for example, Chrome 58 and generic Safari guidance). Use the current Sync Troubleshooting and Accessing EZ Ops documentation for device-specific guidance.


Operator Dashboard vs Report Dashboard vs Locations
Goal Go to
Outstanding work across my sites (offline after sync) Operator Dashboard
Embedded analytics — needs internet Report Dashboard
Enter readings, receive pigs, complete inspections Locations → Location page
Tips & recommendations
  • Most due lists default to Upcoming or Incomplete — switch tabs when you need Planned, Deferred, All, or Completed.
  • Use dashboard to find work; use the Location page to finish it (especially inspections, tank readings, send/receive pigs).
  • Clear Filter Field when lists look too narrow.
  • For receiver work: Pending → location link → Receivers. For sends: Pig Schedules → sender link → Senders.
  • For a tank snapshot: filter Tanks, then Download List.