Understanding the Schedules Report
The Schedules Report is an online report that lists equipment and location schedules, either the ones still to be done or the ones completed in a date range, filtered by location and schedule type. Seven entries in the Reports menu open this same report — Schedules Report, Reminders Report, Calibrations Schedules Report, Safety Schedules Report, MSAPR Schedules Report, and Samples Report — and each one simply pre-selects a different Schedule Type. You can change the type once the report is open, so it does not matter which entry you start from.
Where to Find the Schedules ReportOpen the Reports menu. The report appears in up to six menu groups, each pre-selecting a schedule type:
| Menu group | Menu entry | Schedule Type it opens with |
|---|---|---|
| Operations & Inspections | Schedules Report | Blank — every type |
| Operations & Inspections | Reminders Report | Reminder |
| Rotating Equipment | Schedules Report | Preventative Maintenance |
| Calibrations | Calibrations Schedules Report | Calibration |
| Forms (MOC/RIK, HS&E, Custom Forms) | Safety Schedules Report | Safety |
| Emissions | MSAPR Schedules Report | MSAPR |
| Gas, Condy & Water Samples | Samples Report | Sample |
The Operations & Inspections group is called Operations when the Inspections module is off, and the Forms group heading changes with the form types your organization uses.
Several entries share the name "Schedules Report". The Operations, Rotating Equipment, and Forms entries can all read Schedules Report, and on some screens the Calibrations entry does too — the menu inside the field app labels a couple of entries differently from the menu on online pages. They all open the same report. Check the Schedule Type dropdown after the page opens to see which type you are looking at. [CONFIRM: which screens show which menu labels]
Searching the Reports menu. Typing "schedules" into Search all reports... finds most of these entries, but not Reminders Report or Samples Report, and it also finds Pig Schedules, which is a different page. Search for "reminders" or "samples" to find those two.
What Each Schedule Type IncludesThe Schedule Type filter matches one type exactly. Leaving it blank returns every type.
| Schedule Type | Schedules it lists | Menu entry that opens with it |
|---|---|---|
| Reminder | Reminder schedules on plants and field locations | Reminders Report |
| Preventative Maintenance | Maintenance schedules on equipment | Schedules Report (Rotating Equipment) |
| Calibration | Calibration schedules on equipment and on locations | Calibrations Schedules Report |
| Safety | Safety schedules on plants and field locations | Safety Schedules Report |
| Sample | Sample schedules on equipment | Samples Report |
| Well Sample | Sample schedules on plants and field locations | None — choose it from the dropdown |
| PSVs | PSV and vessel schedules | None — choose it from the dropdown |
| MSAPR | Emissions checks and performance tests on equipment | MSAPR Schedules Report |
MSAPR only appears in the dropdown when your organization has the MSAPR emissions module turned on.
Samples Report does not include well samples. A sample scheduled on equipment is a Sample; a sample scheduled on a plant or field location is a Well Sample. The Samples Report opens with Sample selected, so location samples stay hidden until you change the Schedule Type to Well Sample or clear it.
How to Run the Schedules Report- Open the report - Choose any Schedules Report entry from the Reports menu.
- Choose a location filter - Under Filter results by:, pick CGU, Region, Area, Field, Run, Plant and Associated Locations, Plant, Field Locations, or Equipment, then pick the item. No Filter reports on everything you can access.
- Set the Schedule Type - Keep the type the menu entry chose, pick another, or clear it to include every type.
- Choose Completed or Incomplete - One of the two is required.
- Set the dates for a Completed report - Under Completed Within, enter a Start Date and an End Date. Both are required, and the report lists schedules whose completion date falls in that range.
- Filter by parent task (optional) - On an Incomplete report, when task components are turned on, the Parent Task Filter narrows the list to All, Linked to a Task, or Not Linked to a Task. Organizations that rename Tasks see their own term here.
- Tick Export To Excel (optional) - Downloads the results as a spreadsheet instead of showing them on the page.
- Click Generate - A spinner shows while the report builds. Large reports can take a moment.
The results table shows 10 schedules per page. The search box above the table filters the rows already loaded, and clicking a column heading sorts by it.
Understanding the Incomplete ReportAn Incomplete report lists active schedules that still need to be done, with these columns:
- Location - The plant or field location
- Scheduled For - The equipment the schedule is on, shown as "Parent - Component" for a component schedule
- Description - The schedule's description
- EZ Ops Projected Service - Days remaining and the projected due date, for example "12 days (2026-10-10)"
- Planned Date - The date someone planned the work for, if any
- Previous Service - The last completion date
- Warning Level - High, Medium, Low, or Scheduled (not yet in its warning period)
- Notes and Files - Whether the schedule has a planning note or attachments
Click a row to expand it. From the expanded row you can:
- See the Schedule Frequency, for example "250 hours" or "6 month(s)"
- Fill in any forms attached to the schedule
- Complete the schedule. If a form is required for the schedule, Complete stays disabled until that form is done
- Defer the schedule. Static schedules cannot be deferred, and the button shows "Static schedules cannot be deferred."
- Add Cost or Edit Cost, when your organization uses the Costs module
- Add or view attachments, and read the Planned Date and Planning Note
- Review Schedule History. Click View Full History to load older completions and deferrals
When task components are turned on, each row also has Create Parent Task, or View Parent Task if one already exists.
Understanding the Completed ReportA Completed report lists schedules completed within the dates you chose, with these columns:
- Location, Scheduled For, and Description
- Projected Service Hours and Hours at Completion - For hour-based schedules. Date schedules show N/A
- Projected Service Date and Completed Date
- Files - Whether the completion has attachments
Click a row to expand it and see who completed it and when (Completed by:), open any submitted form with View [form name] Form, read the Additional Note entered at completion, view attachments, and review the Deferment History if the schedule was deferred before it was completed.
Who Can See the Schedules ReportOpening the Schedules Report needs the Schedules Reports role permission, or All Reports. Admins can open it regardless of role.
Each menu entry also has to pass the conditions for its menu group, so a user can see some entries and not others:
| Menu entry | Shows when |
|---|---|
| Schedules Report (Operations), Reminders Report, Safety Schedules Report, Samples Report | The Schedules module is on and your role includes Schedules Reports |
| Schedules Report (Rotating Equipment) | As above, plus the Equipment module is on and your role includes Equipment Reports or Projected Cost Report |
| Calibrations Schedules Report | As above, plus your role includes Meters Reports |
| MSAPR Schedules Report | Your organization has the Multi-Sector Air Pollutants Regulations setting on and your role includes Emissions Report |
If one entry is missing but you can open another, choose the type you need from the Schedule Type dropdown instead — for example, a user with Schedules Reports but not Meters Reports can open the Operations Schedules Report and choose Calibration. If every entry is missing, ask your administrator to check your role.
Common Issues"I can't find well samples in the Samples Report"
- The Samples Report shows equipment samples only. Change the Schedule Type to Well Sample for samples scheduled on a plant or field location, or clear it to see both.
"There's no menu entry for PSV schedules"
- PSV and vessel schedules have no menu entry of their own. Open any Schedules Report entry and choose PSVs from the Schedule Type dropdown.
"No schedules found."
- On a Completed report, widen the Start Date and End Date. The range is matched against the date the schedule was completed, not the date it was due.
- Check the Schedule Type. It is pre-filled by the menu entry you used and only matches that one type.
- Clear the Schedule Type for a full picture - A blank Schedule Type returns every type in one run, which is quicker than opening each menu entry in turn.
- Use the Equipment filter for one unit's history - Filter results by: Equipment limits the report to the equipment you pick, which is the fastest way to review everything scheduled on a single engine or compressor.