Skip to content
English
  • There are no suggestions because the search field is empty.

User Configuration

 What is User Configuration?

User configuration in EZ Ops covers creating user accounts, setting access levels and roles, assigning users to locations, granting special permissions, and managing departments. Getting users configured correctly controls what each person can see, do, and be notified about in the app.

Key point: There are two separate things that define what a user can do — their access level (system permissions) and their location assignments (what sites they can see). Both must be configured for a user to be fully operational.

Access Levels

Access levels control what a user can do system-wide. There are four levels admins can assign:

Level Label What They Can Do
2 Employee Operators — create tasks, logbook entries, fill forms, complete schedules and inspections, log readings. Standard field user.
3 Admin Everything an Employee can do, plus create/edit/delete locations, equipment, tanks, users, pipelines, schedules, and inspections. Manage org configuration.
4 EZOPS Team Reserved for EZOPS staff only — not assignable by admins. Access to org settings, Nova, and programmer-only features.
5 Report Viewer Read-only access to reports only. Cannot log data or complete work items.

Important: Access level 4 (EZOPS Team) cannot be assigned by admins — contact EZ Ops Support at 888-378-4602 ext. 1 or EzopsSupport@Detechtion.com if a user at this level is needed.

Roles

Roles are separate from access levels and represent a user's job function. Roles affect notification routing (e.g., which forms a user is emailed about) but do not change system permissions. Common roles include:

  • Operator
  • Foreman
  • Drilling
  • HS&E Coordinator
  • Office Staff
  • Office Executive
  • Log Book Supervisor

A user's role is selected when creating or editing their account.

Special Permission Flags

In addition to access level, users can be granted specific permission flags that extend their capabilities:

Flag What it enables
hse_admin Access to the HSE Dashboard for reviewing and approving HSE form workflows. Also unlocks Admin Edit and Delete on completed Health & Safety forms in the Forms Report — an access 3 admin without this flag will not see those buttons on HSE forms.
moc_coordinator Can act as an MOC Coordinator in the MOC/RIK workflow. Also unlocks Admin Edit on completed MOC and RIK forms in the Forms Report for anyone other than the user who logged the form.
moc_reviewer Can act as a reviewer in the MOC/RIK workflow
cost_admin Can edit projected costs for schedules
inspection_admin Extended inspection management permissions
org_wide_log_book_supervisor Must acknowledge all logbook entries across the entire organization
can_import Can use the bulk import tools
day_planner Access to the day planner feature

These are configured in the user's settings section.

Note on hse_admin: only an existing HSE Admin or the EZOPS Team can turn this flag on for another user. If no one at your organization currently has it, contact EZ Ops Support at 888-378-4602 ext. 1 or EzopsSupport@Detechtion.com to have the first HSE Admin set up.

How to Create a User
  1. Navigate to Users - Go to the admin menu and select Users
  2. Click "Add User" / "Register" - Opens the registration form
  3. Enter required details:
    • Name - Full name as it will appear in the app
    • Email - Used for login and all email notifications
    • Password - Set an initial password (the user can change it after first login)
    • Access level - Select 2 (Employee), 3 (Admin), or 5 (Report Viewer)
  4. Set the role - Select the user's job function from the role list
  5. Save - The account is created. Now configure location assignments and permissions.
How to Assign a User to Locations

Location assignments control which plants and field locations the user can see offline and work with. Without location assignments, the user cannot see any data in the app.

  1. Open the user - Navigate to the user in the Users admin list
  2. Go to Location Assignments - Find the location assignment section
  3. Set the connection type — the Connect to dropdown. A user can only be on one of these at a time:
    • Plants and Associated Locations - The user is connected to specific named plants; they see all field locations under those plants
    • Fields - The user is connected to geographic fields; they see all plants and locations within those fields
    • Runs - Route-based assignment for operators who travel a set circuit of sites. This option is hidden if the org setting Disable Users Assignable to Runs is on
    Changing Connect to deletes the user's existing assignments under the previous option when you save, including the per-location flags on them.
  4. Select the locations - Tick Assigned for the plants, fields, or runs to assign. Filter by area and the search box narrow the list; the checkbox in the grey row under Assigned assigns or unassigns everything shown on the current page
  5. Set per-location permissions — for each assigned location you can grant additional flags:
    • Log Acknowledgement - This user must acknowledge all logbook entries at this location (Logbook Supervisor role)
    • Form Supervisor - This user is the form supervisor for this location; receives workflow notifications for forms filled out here
    • Office Supervisor - Supervisory role at this location for reporting
    • Cost Admin - Can edit projected costs for this location's schedules
    • Out of Spec Emails - Receives email alerts when reading sheet values go out of spec at this location
  6. Save - The user will see the assigned locations on their next sync

Users Can Change Their Own Assigned Locations

The Assigned Locations panel is the same panel every user sees on their own record under their name > Edit Info, and they can save changes to it without admin help. Operators use this to shrink their sync down to the area they are working. Two consequences for admins:

  • Your assignment is a starting point, not a lock. A user who is missing sites they should have may have unassigned them; a user reporting slow syncs can fix it themselves
  • The per-location supervisor flags are protected. Users can tick their own locations and Out Of Spec Emails, but Log Book Supervisor, Office Supervisor, and Costs Admin are read-only for them and stay yours to set

Users cannot create or edit runs — a run's member sites are configured by an admin. A user on the Runs connection type can only assign themselves to runs that already exist.

How to Assign a User to Departments

Departments group users for task assignment and form workflow notifications. A user can belong to multiple departments.

  1. Navigate to Departments in the admin menu (or in the user's profile)
  2. Find the relevant department and add the user to it
  3. Alternatively, open the user's profile and add departments from there

Departments affect:

  • Task assignment - Tasks can be assigned to a department; all members of that department receive the task
  • Form workflow notifications - When a form with a department workflow fires, department supervisors and members are notified based on the department configuration
Editing an Existing User

To update a user's details, role, or permissions:

  1. Navigate to Users and open the user
  2. Update as needed - Name, email, role, title, access level (within your own level), and permission flags
  3. Save - Changes take effect immediately; the user will see permission changes on their next sync

To reset a user's password as an admin:

  • Open the user's profile
  • Use the Admin Change Password option
  • Enter and confirm the new password
  • The user can change it again after logging in
Deactivating and Restoring Users

To deactivate a user:

  • Open the user and select Delete/Deactivate
  • You will be prompted to reassign any open tasks the user is currently assigned to — select the user who should take over those tasks
  • The deactivated user can no longer log in
  • All their historical activity (logbook entries, completed tasks, readings) is preserved

To restore a deactivated user:

  • In the Users admin list, filter to show deleted users
  • Find the user and select Restore
  • Reassign them to locations and departments as needed
Common Issues

"The user can log in but sees no locations in the app"

  • The user has no location assignments — go to their profile and assign them to the relevant plants or fields
  • After assigning, the user must sync their device to pull the new locations
  • If they previously had locations, check whether they trimmed their own list or changed their own Connect to option, which deletes the assignments held under the previous option

"A user is receiving notifications for locations they no longer work at"

  • Remove the location from their location assignments — this will stop all notification routing for that location
  • Check department memberships too — if they are in a department that is the default contact for forms at that location, remove them from the department or update the department's location settings

"A user says they are not receiving logbook acknowledgement emails"

  • Check that their email is correct in their profile
  • Confirm the Log Acknowledgement flag is set on their location assignment for the relevant plant
  • The user can also enable Immediate Acknowledgement Emails in their own user settings

"I deleted a user but their tasks are still showing unassigned"

  • During deletion, tasks should be reassigned — if you did not reassign them at the time, use the Task Report to find outstanding tasks previously assigned to that user and reassign them manually

"An access 3 admin can't see Admin Edit or Delete on a form in the Forms Report"

  • If the form is a Health & Safety form, the buttons are gated by the hse_admin flag. Access level alone is not enough — turn on hse_admin in the user's profile and have them refresh
  • If the form is MOC or RIK, Admin Edit is only shown to the user who logged the form or a user with the moc_coordinator flag. Delete still shows to any admin
  • If the buttons are missing on all non-HSE forms including Custom and Inspection, confirm the user is actually access level 3 — a user at access 2 (Employee) or 5 (Report Viewer) will not see the Admin Edit or Delete buttons on any form
Best Practices
  • Set location assignments immediately after/during creating a user - A user without location assignments cannot do anything useful in the app
  • Use the role field accurately - Roles affect which form workflows and notifications the user receives; an incorrect role can cause missed communications
  • Review department memberships when roles change - If a user changes job function, update their departments to ensure they are in the right notification groups
  • Use Log Acknowledgement sparingly - Users with this flag must acknowledge every logbook entry at that location; too many logbook supervisors creates unnecessary overhead
  • Deactivate rather than delete - Soft-delete preserves historical records; permanent deletion is not easily reversible
Quick Tips
  • A user's access level can only be set to a level equal to or lower than your own — admins (level 3) cannot create other level 3 or level 4 users without being level 4 themselves
  • Users can see reports such as the task report online without syncing — useful for supervisors who need a current view without being in the field
  • Departments are configured in the Departments section of the admin menu — create departments there before assigning users to them

Remember: A user needs two things to be fully operational — the right access level to perform their job functions, and the right location assignments to see the data they need. Configure both before the user's first login.