Skip to content
English
  • There are no suggestions because the search field is empty.

What is the "Today's Items" page

 What is Today's Items

Today's Items is a prioritized list of the field locations that need your attention right now, built from the outstanding work and active alerts across every location you are assigned to. Instead of opening sites one by one to find out what is due, you get one screen that puts the busiest and most urgent locations at the top. The page heading reads Recommended Field Locations and refers to the same screen.

What Shows Up on the List

A location appears on the list when it has at least one outstanding item or one active alert. Locations with nothing due are left off entirely.

Only field locations are listed. Wells and pads appear here; plants do not. If you work a plant, open it from the Locations page instead — Today's Items will never show it, even when work is due there.

What counts as an outstanding item

Expanding a location shows what is outstanding, grouped by type:

  • Tasks
  • Corrective actions raised from a form
  • Tasks raised from an inspection
  • Tank readings that need to be taken
  • Pump readings that need to be taken
  • Pigs that need to be received
  • Pigs that need to be sent
  • Schedules that need to be completed
  • Inspections that need to be completed
  • Equipment that needs to be read

Each group is labelled with a count, for example 3 tank(s) that need(s) to be read. Where an item has a long description, See full description expands it.

What "today" means

An item is on the list when it is due today or overdue. Work scheduled for a future date is not shown until its due date arrives, so the list does not fill up with things you cannot action yet. Overdue items stay on the list until they are completed.

How the list is ordered

Locations are grouped so the most urgent surface first:

  1. Locations with active alerts
  2. Locations with overdue work
  3. Locations with work due today

The page loads ten locations at a time. Load More Data at the bottom brings down the next ten, and once you reach the end you will see You have loaded all the recommended field locations.

Alerts

An alert is a condition EZ Ops has flagged at a location, such as a production or communication problem. Locations carrying one are listed under {N} alert(s) at this location., and a running total appears at the top of the page next to Locations with Alerts:.

Dealing with a single alert

Select Manage next to an alert to open the Dismiss Alert window, where you can:

  • Snooze - Hide the alert until a date you choose under Until:, with an optional Reason/Context
  • False alert - Record that the condition is not real
  • Addressed - Record that you have dealt with it

Visitation alerts cannot be managed this way.

The Manage Alerts tab

The Manage Alerts tab — subtitled Snooze or mark as false — handles alerts in bulk across your locations rather than one at a time. It splits into Active Alerts and Snoozed Alerts, and lets you select several at once and apply Snooze Alerts, Mark as False Alerts, or Unsnooze Alerts.

You can filter by alert type and sort by Impact (High to Low), Impact (Low to High), Location Name (A-Z), or Location Name (Z-A). When there is nothing to act on you will see No alerts to display.

This tab needs an internet connection. Offline, it shows an error rather than the alert list.

Narrowing the List

The filter at the top of the Overview tab lets you pick specific Fields, Runs, or Plants, and you can select more than one. This narrows what is displayed — it does not change which locations you have access to, which is set by your location assignments.

How to Work Through Your Day
  1. Open Today's Items from the main navigation.
  2. Check for the out-of-sync banner. If it says Your data is out of sync with your team. Please sync to display the most up-to-date information., use Sync on Dashboard before you plan anything — you may be looking at stale work.
  3. Work down the list from the top. Locations with alerts and overdue work are already at the top, so you do not need to sort anything.
  4. Expand a location to see exactly what is outstanding there.
  5. Select the location name to open its full page, where you actually complete the readings, forms, and tasks. Today's Items tells you where to go; the location page is where the work gets done.
  6. Sync when you are finished so your team sees the completed work and the items drop off the list.
If Your Organization Uses Day Planner

Day Planner is a separate page, not a different view of this one. When it is enabled, extra buttons appear along the top of Today's Items:

  • Overview - The Today's Items list described in this article
  • Prioritized Action List, Optimization for Operators, or Today's Planned List - Opens Day Planner. Which label you see depends on how your organization has configured it and whether you already have a route selected
  • Optimized Packages - Appears when that module is enabled

Turning Day Planner on does not change what Today's Items shows or the order it appears in.

Using Today's Items Offline

The page works without a connection. It reads the operational data your last sync brought down, so what you see offline is accurate as of that sync — run one before heading out.

Two things behave differently offline:

  • The Manage Alerts tab is unavailable and shows an error instead
  • The out-of-sync banner changes to ask you to sync once a stable connection is available

If you have completed work that has not been synced yet, the page keeps showing your local version rather than overwriting it with the server's copy, so your unsynced work is not lost by opening this screen.

Common Issues

"You have no recommended field locations."

  • Nothing is due or alerting at any of your assigned field locations, which is the normal empty state
  • If that seems wrong, sync — the page is built from synced data, and a stale device shows a stale list
  • Remember that plants never appear here, so plant work will not produce a row

"I can't find Today's Items in the navigation"

  • The page needs two things switched on: the Today's Items Page setting for your organization, and the Today's Items Page permission on your user role
  • If either is missing the menu item is hidden entirely, so contact your administrator

"Based on your user role, you don't have permission to view this page. Contact your organization admin to update your role."

  • Your organization has Today's Items enabled but your role does not include the permission
  • An administrator can add it to your role

"A job I know is due isn't on the list"

  • Check whether the work is at a plant — plants are excluded from this page by design
  • Check whether it is due on a future date, since only items due today or already overdue are listed
  • Check that the location is one you are assigned to

"The list doesn't match what my crew is seeing"

  • Look for the out-of-sync banner and sync from the dashboard
  • Everyone sees their own assigned locations, so two people with different assignments will legitimately see different lists
Tips & Recommendations
  • Sync before you plan, not after - The list is assembled from data your device already holds, so planning a day on a device that has not synced means planning against yesterday's work
  • Snooze rather than ignore - An alert you have looked at and judged not urgent is worth snoozing with a reason, so it stops pushing that location to the top of everyone's list
  • Use the Fields and Runs filter when you are covering an area - It narrows a long list to the part of the country you are actually driving, without touching your location assignments

Remember: Today's Items only lists wells and pads — plant work never appears here no matter how overdue it is, so check your plants from the Locations page separately.